Vodafone Vf695 Firmware / Flash File / Scatter File

MT6572__Vodafone__VF695__VF695__4.4.2__ALPS.KK1.MP6.V1
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In or as well as thus cases necessitate jibe BootKey
Wait for phone…
Phone found! [ xx ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot amongst PL ]
BootLdrSS : NORMAL amongst PRELOADER
Processing DA stage
DA Select done, volition role MTK_AllInOne_DA_v5.1624.16.07
Sending as well as initialize DA …
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : FE014E50314A39344D121DFE1A2A7267
Initialize Memory … 
DRAM already initialized past times Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0xFE , OEM : 014E
[eMMC] : FLASH_INF : [MICRON] , M49J1
[eMMC] : FLASH_CID : FE014E50314A39344D121DFE1A2A7267
[eMMC] : FLASH_BRT : 0x00100000 , 0x00100000 , 0x00100000
[eMMC] : FLASH_LEN : 0x00000000E9800000
[eMMC] : FLASH_UCP : 3736 MiB [eMMC four GiB]
DEV RID    : 0xBB23AFA9983FDBED9882FE159DAB0865
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Content straight off … 
Brand     : Vodafone
ProdName  : VF695
ProdModel : VF695
Device    : VF695
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP6.V1
[Read Ok] : preloader_pixi34_vf.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : custpack.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[ScatCFG] : MT6572 / V1.1.1 / pixi34_vf / EMMC
Android Info saved
HWConfig Info saved
FW Size : 1122 MiB
Scatter saved to : C:\XXX\Desktop\READ\MT6572__Vodafone__VF695__VF695__4.4.2__ALPS.KK1.MP6.V1\
All done!

How to flash stock firmware rom (flash file)
Step 1: Download as well as extract the firmware on your computer.
Step 2: After extracting y’all stimulate got to download SP Tool if y’all already stimulate got skip this step.
Step 3: Install the USB Driver (Skip if drivers are already installed).
Step 4: Open SP Flash tool as well as charge the Scatter file from the firmware Folder.
Step 5: Click on Upgrade / Download Button inward the Sp flash tool to laid out the flashing process.
Step 6: Connect your smartphone to the calculator using the usb Driver.
Step 7: Green Ring volition look at the destination of successful Flash.
Important notes:
Although this firmware is tested withal accept a backup of your mobile information earlier flashing or installing the firmware on your smartphone. As this volition aid y’all to recover the information whenever whatever affair incorrect happens to your mobile.  
Android Bootloop © 2017 Frontier Theme