Huawei G610-U00 Firmware / Flash File / Scatter File

Posted on

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In around cases postulate stand upwards for BootKey

Wait for phone…
Phone found! [ xx ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6583
BB_CPU_NME : [MediaTek] MT6583|6589_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot amongst PL ]
BootLdrSS : NORMAL amongst PRELOADER
Processing DA stage
DA Select done, volition purpose MTK_AllInOne_DA_v5.1624.16.07
Sending together with initialize DA …
Running DA ver.3.2 on BBID : 0x86
NAND Flash : NOT INSTALLED
eMMC Flash : 484A019064314734A30086048541FFF8
Initialize Memory …
DRAM already initialized yesteryear Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164048600A3F8FF4185
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC four GiB]
DEV RID    : 0xBB23AFA93EF1DE75FE0755EA34DD9443
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content instantly …

Brand     : Huawei
ProdName  : G610-U00
ProdModel : HUAWEI G610-U00
Device    : hwG610-U00
AndroidVer: 4.2.1
MTKxCPU   : MT6589
MTKxPRJ   : ALPS.JB2.MP.V1

[Read Ok] : preloader_huawei89_we_jb2.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : custpack1.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6589 / V1.0.0 / huawei89_we_jb2 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1122 MiB
Scatter saved to : C:\Users\Habib\Desktop\READ\MT6589__Huawei__HUAWEI_G610-U00__hwG610-U00__4.2.1__ALPS.JB2.MP.V1\
All done!

MT6589__Huawei__HUAWEI_G610-U00__hwG610-U00__4.2.1__ALPS.JB2.MP.V1

How to flash stock firmware rom (flash file)

Step 1: Download together with extract the firmware on your computer.
Step 2: After extracting you lot conduct maintain to download SP Tool if you lot already conduct maintain skip this step.
Step 3: Install the USB Driver (Skip if drivers are already installed).
Step 4: Open SP Flash tool together with charge the Scatter file from the firmware Folder.
Step 5: Click on Upgrade / Download Button inward the Sp flash tool to laid out the flashing process.
Step 6: Connect your smartphone to the figurer using the usb Driver.
Step 7: Green Ring volition look at the cease of successful Flash.

Important notes:

Although this firmware is tested even then conduct maintain a backup of your mobile information earlier flashing or installing the firmware on your smartphone. As this volition attention you lot to recover the information whenever whatsoever matter incorrect happens to your mobile.  

Incoming search terms:

  • huawei 610-u00 flash tool